Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability

Satoshi Shimabukuro; Piero Diaz; Leonardo Vinces

doi:10.1109/INTERCON50315.2020.9220260

Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability

Satoshi Shimabukuro
, Piero Diaz
, Leonardo Vinces

Faculty of Engineering

Universidad Peruana de Ciencias Aplicadas

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

5 Scopus citations

Abstract

This work proposes the design of a low cost semi-industrial three degree of freedom CNC vertical milling center (VMC) with non-ferrous metal machining capabilities. The design seeks to mitigate the difficulties that acquiring a commercial industrial CNC can present, such as large dimensions, high cost and complications in its transportation within the plant. The proposed machine will be made up of 1 NEMA 23 stepper motor for each X, Y and Z axis, and will be controlled by open source firmware using an ATMEGA 2560 microcontroller. Likewise, the working area will be 320x180mm and will have a precision 100 microns with semi industrial capacities. This design is aimed at small and medium-sized companies that are looking for a low cost non-ferrous CNC milling machine that in turn has the quality, performance and precision of an industrial one.

Original language	English
Title of host publication	Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9781728193779
DOIs	https://doi.org/10.1109/INTERCON50315.2020.9220260
State	Published - Sep 2020
Event	27th IEEE International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020 - Virtual, Lima, Peru Duration: 3 Sep 2020 → 5 Sep 2020

Publication series

Name	Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020

Conference

Conference	27th IEEE International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020
Country/Territory	Peru
City	Virtual, Lima
Period	3/09/20 → 5/09/20

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

3GDL
CNC
GRBL
milling
semi industrial

Access to Document

10.1109/INTERCON50315.2020.9220260

Cite this

Shimabukuro, S., Diaz, P., & Vinces, L. (2020). Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability. In Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020 Article 9220260 (Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/INTERCON50315.2020.9220260

Shimabukuro, Satoshi ; Diaz, Piero ; Vinces, Leonardo. / Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability. Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020. Institute of Electrical and Electronics Engineers Inc., 2020. (Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020).

@inproceedings{af1b5389b3b8471dbea741384132ab5c,

title = "Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability",

abstract = "This work proposes the design of a low cost semi-industrial three degree of freedom CNC vertical milling center (VMC) with non-ferrous metal machining capabilities. The design seeks to mitigate the difficulties that acquiring a commercial industrial CNC can present, such as large dimensions, high cost and complications in its transportation within the plant. The proposed machine will be made up of 1 NEMA 23 stepper motor for each X, Y and Z axis, and will be controlled by open source firmware using an ATMEGA 2560 microcontroller. Likewise, the working area will be 320x180mm and will have a precision 100 microns with semi industrial capacities. This design is aimed at small and medium-sized companies that are looking for a low cost non-ferrous CNC milling machine that in turn has the quality, performance and precision of an industrial one.",

keywords = "3GDL, CNC, GRBL, milling, semi industrial",

author = "Satoshi Shimabukuro and Piero Diaz and Leonardo Vinces",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 27th IEEE International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020 ; Conference date: 03-09-2020 Through 05-09-2020",

year = "2020",

month = sep,

doi = "10.1109/INTERCON50315.2020.9220260",

language = "Ingl{\'e}s",

series = "Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020",

}

Shimabukuro, S, Diaz, P & Vinces, L 2020, Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability. in Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020., 9220260, Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020, Institute of Electrical and Electronics Engineers Inc., 27th IEEE International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020, Virtual, Lima, Peru, 3/09/20. https://doi.org/10.1109/INTERCON50315.2020.9220260

Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability. / Shimabukuro, Satoshi; Diaz, Piero; Vinces, Leonardo.
Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020. Institute of Electrical and Electronics Engineers Inc., 2020. 9220260 (Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability

AU - Shimabukuro, Satoshi

AU - Diaz, Piero

AU - Vinces, Leonardo

PY - 2020/9

Y1 - 2020/9

N2 - This work proposes the design of a low cost semi-industrial three degree of freedom CNC vertical milling center (VMC) with non-ferrous metal machining capabilities. The design seeks to mitigate the difficulties that acquiring a commercial industrial CNC can present, such as large dimensions, high cost and complications in its transportation within the plant. The proposed machine will be made up of 1 NEMA 23 stepper motor for each X, Y and Z axis, and will be controlled by open source firmware using an ATMEGA 2560 microcontroller. Likewise, the working area will be 320x180mm and will have a precision 100 microns with semi industrial capacities. This design is aimed at small and medium-sized companies that are looking for a low cost non-ferrous CNC milling machine that in turn has the quality, performance and precision of an industrial one.

AB - This work proposes the design of a low cost semi-industrial three degree of freedom CNC vertical milling center (VMC) with non-ferrous metal machining capabilities. The design seeks to mitigate the difficulties that acquiring a commercial industrial CNC can present, such as large dimensions, high cost and complications in its transportation within the plant. The proposed machine will be made up of 1 NEMA 23 stepper motor for each X, Y and Z axis, and will be controlled by open source firmware using an ATMEGA 2560 microcontroller. Likewise, the working area will be 320x180mm and will have a precision 100 microns with semi industrial capacities. This design is aimed at small and medium-sized companies that are looking for a low cost non-ferrous CNC milling machine that in turn has the quality, performance and precision of an industrial one.

KW - 3GDL

KW - CNC

KW - GRBL

KW - milling

KW - semi industrial

UR - https://www.scopus.com/pages/publications/85095456319

U2 - 10.1109/INTERCON50315.2020.9220260

DO - 10.1109/INTERCON50315.2020.9220260

M3 - Contribución a la conferencia

AN - SCOPUS:85095456319

T3 - Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020

BT - Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 27th IEEE International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020

Y2 - 3 September 2020 through 5 September 2020

ER -

Shimabukuro S, Diaz P, Vinces L. Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability. In Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020. Institute of Electrical and Electronics Engineers Inc. 2020. 9220260. (Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020). doi: 10.1109/INTERCON50315.2020.9220260

Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this