Production management model based on lean manufacturing for cost reduction in the timber sector in Peru

Fiorella Lastra; Nicolás Meneses; Ernesto Altamirano; Carlos Raymundo; Javier M. Moguerza

doi:10.1007/978-3-030-20494-5_44

Production management model based on lean manufacturing for cost reduction in the timber sector in Peru

Fiorella Lastra, Nicolás Meneses, Ernesto Altamirano, Carlos Raymundo, Javier M. Moguerza

Faculty of Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

8 Scopus citations

Abstract

At present, timber is the only commodity whose demand will increase at worldwide levels. Peru, despite being one of the countries with the highest forest potential, cannot compete with countries such as Brazil and China due to high production costs. Therefore, the aim of this article is to develop a production management model based on Lean Manufacturing techniques to increase production capacity by improving processes and reducing costs. For this, Knowledge Management, Change Management, and Production Management were implemented. The model was validated in a Peruvian timber company, where a 49% reduction in the cleaning and organization time was achieved. Calibration periods were reduced by 61%, and preventive maintenance periods by 72%.

Original language	English
Title of host publication	Advances in Manufacturing, Production Management and Process Control - Proceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control
Editors	Waldemar Karwowski, Stefan Trzcielinski, Beata Mrugalska
Publisher	Springer Verlag
Pages	467-476
Number of pages	10
ISBN (Print)	9783030204938
DOIs	https://doi.org/10.1007/978-3-030-20494-5_44
State	Published - 2019
Event	AHFE International Conference on Human Aspects of Advanced Manufacturing, 2019 and the AHFE International Conference on Advanced Production Management and Process Control, 2019 - Washington D.C., United States Duration: 24 Jul 2019 → 28 Jul 2019

Publication series

Name	Advances in Intelligent Systems and Computing
Volume	971
ISSN (Print)	2194-5357

Conference

Conference	AHFE International Conference on Human Aspects of Advanced Manufacturing, 2019 and the AHFE International Conference on Advanced Production Management and Process Control, 2019
Country/Territory	United States
City	Washington D.C.
Period	24/07/19 → 28/07/19

Keywords

5S
Change management
Knowledge management
Lean manufacturing
Preventive maintenance
SMED
Wood

Access to Document

10.1007/978-3-030-20494-5_44

Cite this

Lastra, F., Meneses, N., Altamirano, E., Raymundo, C., & Moguerza, J. M. (2019). Production management model based on lean manufacturing for cost reduction in the timber sector in Peru. In W. Karwowski, S. Trzcielinski, & B. Mrugalska (Eds.), Advances in Manufacturing, Production Management and Process Control - Proceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control (pp. 467-476). (Advances in Intelligent Systems and Computing; Vol. 971). Springer Verlag. https://doi.org/10.1007/978-3-030-20494-5_44

Lastra, Fiorella ; Meneses, Nicolás ; Altamirano, Ernesto et al. / Production management model based on lean manufacturing for cost reduction in the timber sector in Peru. Advances in Manufacturing, Production Management and Process Control - Proceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control. editor / Waldemar Karwowski ; Stefan Trzcielinski ; Beata Mrugalska. Springer Verlag, 2019. pp. 467-476 (Advances in Intelligent Systems and Computing).

@inproceedings{4d301d007d8b4f17a6beeefddbf6426e,

title = "Production management model based on lean manufacturing for cost reduction in the timber sector in Peru",

abstract = "At present, timber is the only commodity whose demand will increase at worldwide levels. Peru, despite being one of the countries with the highest forest potential, cannot compete with countries such as Brazil and China due to high production costs. Therefore, the aim of this article is to develop a production management model based on Lean Manufacturing techniques to increase production capacity by improving processes and reducing costs. For this, Knowledge Management, Change Management, and Production Management were implemented. The model was validated in a Peruvian timber company, where a 49\% reduction in the cleaning and organization time was achieved. Calibration periods were reduced by 61\%, and preventive maintenance periods by 72\%.",

keywords = "5S, Change management, Knowledge management, Lean manufacturing, Preventive maintenance, SMED, Wood",

author = "Fiorella Lastra and Nicol{\'a}s Meneses and Ernesto Altamirano and Carlos Raymundo and Moguerza, \{Javier M.\}",

note = "Publisher Copyright: {\textcopyright} Springer Nature Switzerland AG 2020.; AHFE International Conference on Human Aspects of Advanced Manufacturing, 2019 and the AHFE International Conference on Advanced Production Management and Process Control, 2019 ; Conference date: 24-07-2019 Through 28-07-2019",

year = "2019",

doi = "10.1007/978-3-030-20494-5\_44",

language = "Ingl{\'e}s",

isbn = "9783030204938",

series = "Advances in Intelligent Systems and Computing",

publisher = "Springer Verlag",

pages = "467--476",

editor = "Waldemar Karwowski and Stefan Trzcielinski and Beata Mrugalska",

booktitle = "Advances in Manufacturing, Production Management and Process Control - Proceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control",

}

Lastra, F, Meneses, N, Altamirano, E , Raymundo, C & Moguerza, JM 2019, Production management model based on lean manufacturing for cost reduction in the timber sector in Peru. in W Karwowski, S Trzcielinski & B Mrugalska (eds), Advances in Manufacturing, Production Management and Process Control - Proceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control. Advances in Intelligent Systems and Computing, vol. 971, Springer Verlag, pp. 467-476, AHFE International Conference on Human Aspects of Advanced Manufacturing, 2019 and the AHFE International Conference on Advanced Production Management and Process Control, 2019, Washington D.C., United States, 24/07/19. https://doi.org/10.1007/978-3-030-20494-5_44

Production management model based on lean manufacturing for cost reduction in the timber sector in Peru. / Lastra, Fiorella; Meneses, Nicolás; Altamirano, Ernesto et al.
Advances in Manufacturing, Production Management and Process Control - Proceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control. ed. / Waldemar Karwowski; Stefan Trzcielinski; Beata Mrugalska. Springer Verlag, 2019. p. 467-476 (Advances in Intelligent Systems and Computing; Vol. 971).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Production management model based on lean manufacturing for cost reduction in the timber sector in Peru

AU - Lastra, Fiorella

AU - Meneses, Nicolás

AU - Altamirano, Ernesto

AU - Raymundo, Carlos

AU - Moguerza, Javier M.

N1 - Publisher Copyright: © Springer Nature Switzerland AG 2020.

PY - 2019

Y1 - 2019

N2 - At present, timber is the only commodity whose demand will increase at worldwide levels. Peru, despite being one of the countries with the highest forest potential, cannot compete with countries such as Brazil and China due to high production costs. Therefore, the aim of this article is to develop a production management model based on Lean Manufacturing techniques to increase production capacity by improving processes and reducing costs. For this, Knowledge Management, Change Management, and Production Management were implemented. The model was validated in a Peruvian timber company, where a 49% reduction in the cleaning and organization time was achieved. Calibration periods were reduced by 61%, and preventive maintenance periods by 72%.

AB - At present, timber is the only commodity whose demand will increase at worldwide levels. Peru, despite being one of the countries with the highest forest potential, cannot compete with countries such as Brazil and China due to high production costs. Therefore, the aim of this article is to develop a production management model based on Lean Manufacturing techniques to increase production capacity by improving processes and reducing costs. For this, Knowledge Management, Change Management, and Production Management were implemented. The model was validated in a Peruvian timber company, where a 49% reduction in the cleaning and organization time was achieved. Calibration periods were reduced by 61%, and preventive maintenance periods by 72%.

KW - 5S

KW - Change management

KW - Knowledge management

KW - Lean manufacturing

KW - Preventive maintenance

KW - SMED

KW - Wood

UR - https://www.scopus.com/pages/publications/85067381842

U2 - 10.1007/978-3-030-20494-5_44

DO - 10.1007/978-3-030-20494-5_44

M3 - Contribución a la conferencia

AN - SCOPUS:85067381842

SN - 9783030204938

T3 - Advances in Intelligent Systems and Computing

SP - 467

EP - 476

BT - Advances in Manufacturing, Production Management and Process Control - Proceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control

A2 - Karwowski, Waldemar

A2 - Trzcielinski, Stefan

A2 - Mrugalska, Beata

PB - Springer Verlag

T2 - AHFE International Conference on Human Aspects of Advanced Manufacturing, 2019 and the AHFE International Conference on Advanced Production Management and Process Control, 2019

Y2 - 24 July 2019 through 28 July 2019

ER -

Lastra F, Meneses N, Altamirano E , Raymundo C, Moguerza JM. Production management model based on lean manufacturing for cost reduction in the timber sector in Peru. In Karwowski W, Trzcielinski S, Mrugalska B, editors, Advances in Manufacturing, Production Management and Process Control - Proceedings of the AHFE 2019 International Conference on Human Aspects of Advanced Manufacturing, and the AHFE International Conference on Advanced Production Management and Process Control. Springer Verlag. 2019. p. 467-476. (Advances in Intelligent Systems and Computing). doi: 10.1007/978-3-030-20494-5_44

Production management model based on lean manufacturing for cost reduction in the timber sector in Peru

Abstract

Publication series

Conference

Keywords

Access to Document

Other files and links

Fingerprint

Cite this