Simulation of a System for Reducing Gases Emitted in a Steel Casting Process by Two-Stage Centrifugal Separation

Alberto Mulatillo; Carla Sernaque; Julio Ronceros; Leonardo Vinces

doi:10.1007/978-3-031-08545-1_51

Simulation of a System for Reducing Gases Emitted in a Steel Casting Process by Two-Stage Centrifugal Separation

Alberto Mulatillo
, Carla Sernaque
, Julio Ronceros
, Leonardo Vinces

Faculty of Engineering

Universidad Peruana de Ciencias Aplicadas

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

8 Scopus citations

Abstract

This study proposes the simulation of a system for reducing polluting gases produced by a steel foundry by two-stage centrifugation. This simulation seeks to verify the physical principle of centrifugation in two cyclones (Stairmand and Swift types) in serial connection: one with its inlet at the outlet of the other, based on initial gas inlet conditions, as well as the design equations of this equipment. Likewise, it's intended to demonstrate the efficiency of this system by entering the mass composition of the gas, in particulate matter (PM) terms, measuring its new composition at the output, after simulating the gas and particle dynamics. For this, Ansys CFD and Ansys Fluent software are used (with previous data analysis and processing), and Python programming techniques to automate calculations and obtain the optimal design values for the cyclones. This system seeks to be an alternative to a universe of expensive and enormous equipment related to environmental pollution control.

Original language	English
Title of host publication	Proceedings of the 7th Brazilian Technology Symposium, BTSym 2021 - Emerging Trends in Systems Engineering Mathematics and Physical Sciences
Editors	Yuzo Iano, Osamu Saotome, Guillermo Leopoldo Kemper Vásquez, Claudia Cotrim Pezzuto, Rangel Arthur, Gabriel Gomes de Oliveira
Publisher	Springer Science and Business Media Deutschland GmbH
Pages	524-535
Number of pages	12
ISBN (Print)	9783031085444
DOIs	https://doi.org/10.1007/978-3-031-08545-1_51
State	Published - 2022
Event	7th Brazilian Technology Symposium, BTSym 2021 - Virtual, Online Duration: 8 Nov 2021 → 10 Nov 2021

Publication series

Name	Smart Innovation, Systems and Technologies
Volume	295 SIST
ISSN (Print)	2190-3018
ISSN (Electronic)	2190-3026

Conference

Conference	7th Brazilian Technology Symposium, BTSym 2021
City	Virtual, Online
Period	8/11/21 → 10/11/21

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 12 Responsible Consumption and Production

Keywords

CFD
Contamination
DPM
Dual cyclone
Pollution
Rosim-Rammler

Access to Document

10.1007/978-3-031-08545-1_51

Cite this

Mulatillo, A., Sernaque, C., Ronceros, J., & Vinces, L. (2022). Simulation of a System for Reducing Gases Emitted in a Steel Casting Process by Two-Stage Centrifugal Separation. In Y. Iano, O. Saotome, G. L. Kemper Vásquez, C. Cotrim Pezzuto, R. Arthur, & G. Gomes de Oliveira (Eds.), Proceedings of the 7th Brazilian Technology Symposium, BTSym 2021 - Emerging Trends in Systems Engineering Mathematics and Physical Sciences (pp. 524-535). (Smart Innovation, Systems and Technologies; Vol. 295 SIST). Springer Science and Business Media Deutschland GmbH. https://doi.org/10.1007/978-3-031-08545-1_51

Mulatillo, Alberto ; Sernaque, Carla ; Ronceros, Julio et al. / Simulation of a System for Reducing Gases Emitted in a Steel Casting Process by Two-Stage Centrifugal Separation. Proceedings of the 7th Brazilian Technology Symposium, BTSym 2021 - Emerging Trends in Systems Engineering Mathematics and Physical Sciences. editor / Yuzo Iano ; Osamu Saotome ; Guillermo Leopoldo Kemper Vásquez ; Claudia Cotrim Pezzuto ; Rangel Arthur ; Gabriel Gomes de Oliveira. Springer Science and Business Media Deutschland GmbH, 2022. pp. 524-535 (Smart Innovation, Systems and Technologies).

@inproceedings{4b06518ca77a4be9937c2c09f1b3dd43,

title = "Simulation of a System for Reducing Gases Emitted in a Steel Casting Process by Two-Stage Centrifugal Separation",

abstract = "This study proposes the simulation of a system for reducing polluting gases produced by a steel foundry by two-stage centrifugation. This simulation seeks to verify the physical principle of centrifugation in two cyclones (Stairmand and Swift types) in serial connection: one with its inlet at the outlet of the other, based on initial gas inlet conditions, as well as the design equations of this equipment. Likewise, it's intended to demonstrate the efficiency of this system by entering the mass composition of the gas, in particulate matter (PM) terms, measuring its new composition at the output, after simulating the gas and particle dynamics. For this, Ansys CFD and Ansys Fluent software are used (with previous data analysis and processing), and Python programming techniques to automate calculations and obtain the optimal design values for the cyclones. This system seeks to be an alternative to a universe of expensive and enormous equipment related to environmental pollution control.",

keywords = "CFD, Contamination, DPM, Dual cyclone, Pollution, Rosim-Rammler",

author = "Alberto Mulatillo and Carla Sernaque and Julio Ronceros and Leonardo Vinces",

note = "Publisher Copyright: {\textcopyright} 2022, The Author(s), under exclusive license to Springer Nature Switzerland AG.; 7th Brazilian Technology Symposium, BTSym 2021 ; Conference date: 08-11-2021 Through 10-11-2021",

year = "2022",

doi = "10.1007/978-3-031-08545-1\_51",

language = "Ingl{\'e}s",

isbn = "9783031085444",

series = "Smart Innovation, Systems and Technologies",

publisher = "Springer Science and Business Media Deutschland GmbH",

pages = "524--535",

editor = "Yuzo Iano and Osamu Saotome and \{Kemper V{\'a}squez\}, \{Guillermo Leopoldo\} and \{Cotrim Pezzuto\}, Claudia and Rangel Arthur and \{Gomes de Oliveira\}, Gabriel",

booktitle = "Proceedings of the 7th Brazilian Technology Symposium, BTSym 2021 - Emerging Trends in Systems Engineering Mathematics and Physical Sciences",

}

Mulatillo, A, Sernaque, C, Ronceros, J & Vinces, L 2022, Simulation of a System for Reducing Gases Emitted in a Steel Casting Process by Two-Stage Centrifugal Separation. in Y Iano, O Saotome, GL Kemper Vásquez, C Cotrim Pezzuto, R Arthur & G Gomes de Oliveira (eds), Proceedings of the 7th Brazilian Technology Symposium, BTSym 2021 - Emerging Trends in Systems Engineering Mathematics and Physical Sciences. Smart Innovation, Systems and Technologies, vol. 295 SIST, Springer Science and Business Media Deutschland GmbH, pp. 524-535, 7th Brazilian Technology Symposium, BTSym 2021, Virtual, Online, 8/11/21. https://doi.org/10.1007/978-3-031-08545-1_51

Simulation of a System for Reducing Gases Emitted in a Steel Casting Process by Two-Stage Centrifugal Separation. / Mulatillo, Alberto; Sernaque, Carla; Ronceros, Julio et al.
Proceedings of the 7th Brazilian Technology Symposium, BTSym 2021 - Emerging Trends in Systems Engineering Mathematics and Physical Sciences. ed. / Yuzo Iano; Osamu Saotome; Guillermo Leopoldo Kemper Vásquez; Claudia Cotrim Pezzuto; Rangel Arthur; Gabriel Gomes de Oliveira. Springer Science and Business Media Deutschland GmbH, 2022. p. 524-535 (Smart Innovation, Systems and Technologies; Vol. 295 SIST).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Simulation of a System for Reducing Gases Emitted in a Steel Casting Process by Two-Stage Centrifugal Separation

AU - Mulatillo, Alberto

AU - Sernaque, Carla

AU - Ronceros, Julio

AU - Vinces, Leonardo

PY - 2022

Y1 - 2022

N2 - This study proposes the simulation of a system for reducing polluting gases produced by a steel foundry by two-stage centrifugation. This simulation seeks to verify the physical principle of centrifugation in two cyclones (Stairmand and Swift types) in serial connection: one with its inlet at the outlet of the other, based on initial gas inlet conditions, as well as the design equations of this equipment. Likewise, it's intended to demonstrate the efficiency of this system by entering the mass composition of the gas, in particulate matter (PM) terms, measuring its new composition at the output, after simulating the gas and particle dynamics. For this, Ansys CFD and Ansys Fluent software are used (with previous data analysis and processing), and Python programming techniques to automate calculations and obtain the optimal design values for the cyclones. This system seeks to be an alternative to a universe of expensive and enormous equipment related to environmental pollution control.

AB - This study proposes the simulation of a system for reducing polluting gases produced by a steel foundry by two-stage centrifugation. This simulation seeks to verify the physical principle of centrifugation in two cyclones (Stairmand and Swift types) in serial connection: one with its inlet at the outlet of the other, based on initial gas inlet conditions, as well as the design equations of this equipment. Likewise, it's intended to demonstrate the efficiency of this system by entering the mass composition of the gas, in particulate matter (PM) terms, measuring its new composition at the output, after simulating the gas and particle dynamics. For this, Ansys CFD and Ansys Fluent software are used (with previous data analysis and processing), and Python programming techniques to automate calculations and obtain the optimal design values for the cyclones. This system seeks to be an alternative to a universe of expensive and enormous equipment related to environmental pollution control.

KW - CFD

KW - Contamination

KW - DPM

KW - Dual cyclone

KW - Pollution

KW - Rosim-Rammler

UR - https://www.scopus.com/pages/publications/85135088411

U2 - 10.1007/978-3-031-08545-1_51

DO - 10.1007/978-3-031-08545-1_51

M3 - Contribución a la conferencia

AN - SCOPUS:85135088411

SN - 9783031085444

T3 - Smart Innovation, Systems and Technologies

SP - 524

EP - 535

BT - Proceedings of the 7th Brazilian Technology Symposium, BTSym 2021 - Emerging Trends in Systems Engineering Mathematics and Physical Sciences

A2 - Iano, Yuzo

A2 - Saotome, Osamu

A2 - Kemper Vásquez, Guillermo Leopoldo

A2 - Cotrim Pezzuto, Claudia

A2 - Arthur, Rangel

A2 - Gomes de Oliveira, Gabriel

PB - Springer Science and Business Media Deutschland GmbH

T2 - 7th Brazilian Technology Symposium, BTSym 2021

Y2 - 8 November 2021 through 10 November 2021

ER -

Mulatillo A, Sernaque C, Ronceros J, Vinces L. Simulation of a System for Reducing Gases Emitted in a Steel Casting Process by Two-Stage Centrifugal Separation. In Iano Y, Saotome O, Kemper Vásquez GL, Cotrim Pezzuto C, Arthur R, Gomes de Oliveira G, editors, Proceedings of the 7th Brazilian Technology Symposium, BTSym 2021 - Emerging Trends in Systems Engineering Mathematics and Physical Sciences. Springer Science and Business Media Deutschland GmbH. 2022. p. 524-535. (Smart Innovation, Systems and Technologies). doi: 10.1007/978-3-031-08545-1_51

Simulation of a System for Reducing Gases Emitted in a Steel Casting Process by Two-Stage Centrifugal Separation

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this