Times Optimization in the Installation of Loading Pipes in Underground Mining Operation

Rolling Sereno-Ricse; Fernando Trinidad-Guerra; Jorginho Hinostroza-Arias; Jose Velasquez-Costa

doi:10.1109/ANDESCON61840.2024.10755737

Times Optimization in the Installation of Loading Pipes in Underground Mining Operation

Rolling Sereno-Ricse
, Fernando Trinidad-Guerra
, Jorginho Hinostroza-Arias
, Jose Velasquez-Costa

Universidad Continental

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

Abstract

Economic policies and the crisis caused by COVID-19 have harmed mining production, with minimal, slow, and conservative investments. An alternative to improve this is underground mining, which represents 43% of worldwide operations; however, the limited production and the number of accidents are limiting, so the procedure for the optimization of times and the time of exposure of workers to danger during the installation of loading tubes were evaluated. For this, the current and improved PAD and POD were analyzed (after the modification of the bit and loading tube), evidencing that in the current procedure, it takes 91 minutes for the installation, with an advance of two and a half cycles. In contrast, in the improved situation, it takes 23 minutes, reaching three cycles, concluding that there is an optimization of 68 minutes per cycle. The time of exposure to danger is also reduced by 2.8 hours.

Original language	English
Title of host publication	IEEE Andescon, ANDESCON 2024 - Proceedings
Publisher	Institute of Electrical and Electronics Engineers Inc.
ISBN (Electronic)	9798350355284
DOIs	https://doi.org/10.1109/ANDESCON61840.2024.10755737
State	Published - 2024
Externally published	Yes
Event	12th IEEE Andescon, ANDESCON 2024 - Cusco, Peru Duration: 11 Sep 2024 → 13 Sep 2024

Publication series

Name	IEEE Andescon, ANDESCON 2024 - Proceedings

Conference

Conference	12th IEEE Andescon, ANDESCON 2024
Country/Territory	Peru
City	Cusco
Period	11/09/24 → 13/09/24

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

Loading tubes
optimization of times
underground mining

Access to Document

10.1109/ANDESCON61840.2024.10755737

Cite this

Sereno-Ricse, R., Trinidad-Guerra, F., Hinostroza-Arias, J., & Velasquez-Costa, J. (2024). Times Optimization in the Installation of Loading Pipes in Underground Mining Operation. In IEEE Andescon, ANDESCON 2024 - Proceedings (IEEE Andescon, ANDESCON 2024 - Proceedings). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ANDESCON61840.2024.10755737

@inproceedings{95f2cab743f34307a6612ec25425d081,

title = "Times Optimization in the Installation of Loading Pipes in Underground Mining Operation",

abstract = "Economic policies and the crisis caused by COVID-19 have harmed mining production, with minimal, slow, and conservative investments. An alternative to improve this is underground mining, which represents 43\% of worldwide operations; however, the limited production and the number of accidents are limiting, so the procedure for the optimization of times and the time of exposure of workers to danger during the installation of loading tubes were evaluated. For this, the current and improved PAD and POD were analyzed (after the modification of the bit and loading tube), evidencing that in the current procedure, it takes 91 minutes for the installation, with an advance of two and a half cycles. In contrast, in the improved situation, it takes 23 minutes, reaching three cycles, concluding that there is an optimization of 68 minutes per cycle. The time of exposure to danger is also reduced by 2.8 hours.",

keywords = "Loading tubes, optimization of times, underground mining",

author = "Rolling Sereno-Ricse and Fernando Trinidad-Guerra and Jorginho Hinostroza-Arias and Jose Velasquez-Costa",

note = "Publisher Copyright: {\textcopyright} 2024 IEEE.; 12th IEEE Andescon, ANDESCON 2024 ; Conference date: 11-09-2024 Through 13-09-2024",

year = "2024",

doi = "10.1109/ANDESCON61840.2024.10755737",

language = "Ingl{\'e}s",

series = "IEEE Andescon, ANDESCON 2024 - Proceedings",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "IEEE Andescon, ANDESCON 2024 - Proceedings",

}

Sereno-Ricse, R, Trinidad-Guerra, F, Hinostroza-Arias, J & Velasquez-Costa, J 2024, Times Optimization in the Installation of Loading Pipes in Underground Mining Operation. in IEEE Andescon, ANDESCON 2024 - Proceedings. IEEE Andescon, ANDESCON 2024 - Proceedings, Institute of Electrical and Electronics Engineers Inc., 12th IEEE Andescon, ANDESCON 2024, Cusco, Peru, 11/09/24. https://doi.org/10.1109/ANDESCON61840.2024.10755737

Times Optimization in the Installation of Loading Pipes in Underground Mining Operation. / Sereno-Ricse, Rolling; Trinidad-Guerra, Fernando; Hinostroza-Arias, Jorginho et al.
IEEE Andescon, ANDESCON 2024 - Proceedings. Institute of Electrical and Electronics Engineers Inc., 2024. (IEEE Andescon, ANDESCON 2024 - Proceedings).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - Times Optimization in the Installation of Loading Pipes in Underground Mining Operation

AU - Sereno-Ricse, Rolling

AU - Trinidad-Guerra, Fernando

AU - Hinostroza-Arias, Jorginho

AU - Velasquez-Costa, Jose

PY - 2024

Y1 - 2024

N2 - Economic policies and the crisis caused by COVID-19 have harmed mining production, with minimal, slow, and conservative investments. An alternative to improve this is underground mining, which represents 43% of worldwide operations; however, the limited production and the number of accidents are limiting, so the procedure for the optimization of times and the time of exposure of workers to danger during the installation of loading tubes were evaluated. For this, the current and improved PAD and POD were analyzed (after the modification of the bit and loading tube), evidencing that in the current procedure, it takes 91 minutes for the installation, with an advance of two and a half cycles. In contrast, in the improved situation, it takes 23 minutes, reaching three cycles, concluding that there is an optimization of 68 minutes per cycle. The time of exposure to danger is also reduced by 2.8 hours.

AB - Economic policies and the crisis caused by COVID-19 have harmed mining production, with minimal, slow, and conservative investments. An alternative to improve this is underground mining, which represents 43% of worldwide operations; however, the limited production and the number of accidents are limiting, so the procedure for the optimization of times and the time of exposure of workers to danger during the installation of loading tubes were evaluated. For this, the current and improved PAD and POD were analyzed (after the modification of the bit and loading tube), evidencing that in the current procedure, it takes 91 minutes for the installation, with an advance of two and a half cycles. In contrast, in the improved situation, it takes 23 minutes, reaching three cycles, concluding that there is an optimization of 68 minutes per cycle. The time of exposure to danger is also reduced by 2.8 hours.

KW - Loading tubes

KW - optimization of times

KW - underground mining

UR - https://www.scopus.com/pages/publications/85211952869

U2 - 10.1109/ANDESCON61840.2024.10755737

DO - 10.1109/ANDESCON61840.2024.10755737

M3 - Contribución a la conferencia

AN - SCOPUS:85211952869

T3 - IEEE Andescon, ANDESCON 2024 - Proceedings

BT - IEEE Andescon, ANDESCON 2024 - Proceedings

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 12th IEEE Andescon, ANDESCON 2024

Y2 - 11 September 2024 through 13 September 2024

ER -

Times Optimization in the Installation of Loading Pipes in Underground Mining Operation

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this