Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability

Satoshi Shimabukuro; Piero Diaz; Leonardo Vinces

doi:10.1109/INTERCON50315.2020.9220260

Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability

Satoshi Shimabukuro
, Piero Diaz
, Leonardo Vinces

Facultad de Ingeniería

Universidad Peruana de Ciencias Aplicadas

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

5 Citas (Scopus)

Resumen

This work proposes the design of a low cost semi-industrial three degree of freedom CNC vertical milling center (VMC) with non-ferrous metal machining capabilities. The design seeks to mitigate the difficulties that acquiring a commercial industrial CNC can present, such as large dimensions, high cost and complications in its transportation within the plant. The proposed machine will be made up of 1 NEMA 23 stepper motor for each X, Y and Z axis, and will be controlled by open source firmware using an ATMEGA 2560 microcontroller. Likewise, the working area will be 320x180mm and will have a precision 100 microns with semi industrial capacities. This design is aimed at small and medium-sized companies that are looking for a low cost non-ferrous CNC milling machine that in turn has the quality, performance and precision of an industrial one.

Idioma original	Inglés
Título de la publicación alojada	Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020
Editorial	Institute of Electrical and Electronics Engineers Inc.
ISBN (versión digital)	9781728193779
DOI	https://doi.org/10.1109/INTERCON50315.2020.9220260
Estado	Publicada - set. 2020
Evento	27th IEEE International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020 - Virtual, Lima, Perú Duración: 3 set. 2020 → 5 set. 2020

Serie de la publicación

Nombre	Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020

Conferencia

Conferencia	27th IEEE International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020
País/Territorio	Perú
Ciudad	Virtual, Lima
Período	3/09/20 → 5/09/20

ODS de las Naciones Unidas

Este resultado contribuye a los siguientes Objetivos de Desarrollo Sostenible

ODS 7: Energía asequible y no contaminante

Acceder al documento

10.1109/INTERCON50315.2020.9220260

Otros archivos y enlaces

Enlace a la publicación en Scopus

Citar esto

Shimabukuro, S., Diaz, P., & Vinces, L. (2020). Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability. En Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020 Artículo 9220260 (Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/INTERCON50315.2020.9220260

Shimabukuro, Satoshi ; Diaz, Piero ; Vinces, Leonardo. / Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability. Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020. Institute of Electrical and Electronics Engineers Inc., 2020. (Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020).

@inproceedings{af1b5389b3b8471dbea741384132ab5c,

title = "Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability",

abstract = "This work proposes the design of a low cost semi-industrial three degree of freedom CNC vertical milling center (VMC) with non-ferrous metal machining capabilities. The design seeks to mitigate the difficulties that acquiring a commercial industrial CNC can present, such as large dimensions, high cost and complications in its transportation within the plant. The proposed machine will be made up of 1 NEMA 23 stepper motor for each X, Y and Z axis, and will be controlled by open source firmware using an ATMEGA 2560 microcontroller. Likewise, the working area will be 320x180mm and will have a precision 100 microns with semi industrial capacities. This design is aimed at small and medium-sized companies that are looking for a low cost non-ferrous CNC milling machine that in turn has the quality, performance and precision of an industrial one.",

keywords = "3GDL, CNC, GRBL, milling, semi industrial",

author = "Satoshi Shimabukuro and Piero Diaz and Leonardo Vinces",

note = "Publisher Copyright: {\textcopyright} 2020 IEEE.; 27th IEEE International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020 ; Conference date: 03-09-2020 Through 05-09-2020",

year = "2020",

month = sep,

doi = "10.1109/INTERCON50315.2020.9220260",

language = "Ingl{\'e}s",

series = "Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

booktitle = "Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020",

}

Shimabukuro, S, Diaz, P & Vinces, L 2020, Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability. En Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020., 9220260, Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020, Institute of Electrical and Electronics Engineers Inc., 27th IEEE International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020, Virtual, Lima, Perú, 3/09/20. https://doi.org/10.1109/INTERCON50315.2020.9220260

Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability. / Shimabukuro, Satoshi; Diaz, Piero; Vinces, Leonardo.
Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020. Institute of Electrical and Electronics Engineers Inc., 2020. 9220260 (Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020).

Producción científica: Capítulo del libro/informe/acta de congreso › Contribución a la conferencia › revisión exhaustiva

TY - GEN

T1 - Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability

AU - Shimabukuro, Satoshi

AU - Diaz, Piero

AU - Vinces, Leonardo

PY - 2020/9

Y1 - 2020/9

N2 - This work proposes the design of a low cost semi-industrial three degree of freedom CNC vertical milling center (VMC) with non-ferrous metal machining capabilities. The design seeks to mitigate the difficulties that acquiring a commercial industrial CNC can present, such as large dimensions, high cost and complications in its transportation within the plant. The proposed machine will be made up of 1 NEMA 23 stepper motor for each X, Y and Z axis, and will be controlled by open source firmware using an ATMEGA 2560 microcontroller. Likewise, the working area will be 320x180mm and will have a precision 100 microns with semi industrial capacities. This design is aimed at small and medium-sized companies that are looking for a low cost non-ferrous CNC milling machine that in turn has the quality, performance and precision of an industrial one.

AB - This work proposes the design of a low cost semi-industrial three degree of freedom CNC vertical milling center (VMC) with non-ferrous metal machining capabilities. The design seeks to mitigate the difficulties that acquiring a commercial industrial CNC can present, such as large dimensions, high cost and complications in its transportation within the plant. The proposed machine will be made up of 1 NEMA 23 stepper motor for each X, Y and Z axis, and will be controlled by open source firmware using an ATMEGA 2560 microcontroller. Likewise, the working area will be 320x180mm and will have a precision 100 microns with semi industrial capacities. This design is aimed at small and medium-sized companies that are looking for a low cost non-ferrous CNC milling machine that in turn has the quality, performance and precision of an industrial one.

KW - 3GDL

KW - CNC

KW - GRBL

KW - milling

KW - semi industrial

UR - https://www.scopus.com/pages/publications/85095456319

U2 - 10.1109/INTERCON50315.2020.9220260

DO - 10.1109/INTERCON50315.2020.9220260

M3 - Contribución a la conferencia

AN - SCOPUS:85095456319

T3 - Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020

BT - Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 27th IEEE International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020

Y2 - 3 September 2020 through 5 September 2020

ER -

Shimabukuro S, Diaz P, Vinces L. Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability. En Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020. Institute of Electrical and Electronics Engineers Inc. 2020. 9220260. (Proceedings of the 2020 IEEE 27th International Conference on Electronics, Electrical Engineering and Computing, INTERCON 2020). doi: 10.1109/INTERCON50315.2020.9220260

Low cost semi-industrial 3GDL CNC vertical milling center design with non-ferrous metal machining capability

Resumen

Serie de la publicación

Conferencia

ODS de las Naciones Unidas

Acceder al documento

Otros archivos y enlaces

Huella

Citar esto